Subject: Aluminum end housings.
From: Paul
Date: 2/4/2000, 10:31 AM

Bktrub@aol.com wrote:

The sandwich idea has l lot of merit- and if you were to machine the alloy
portion of the end housing, you could machine in integral engine mount
points. The CG of the engine with a Ross or Crook redrive falls pretty near
the bell housing end of the engine, doesn't it?
Brian Trubee
Redmond, Wa

Yes I would say so. I am guessing about under the 2nd rotor housing.
Perhaps even a little further aft if you include the prop.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org