Subject: 2 Sided Rotor - Diesel
From: Paul
Date: 2/6/2000, 2:41 PM

Bill Marvin wrote:

Some additional thoughts on my totally unoriginal idea:
The rotor speed in a 3-sided rotary is 2000rpm at an output shaft speed of
6000rpm.  With the same rotor speed in a 2-sided rotary, the output shaft
speed would be only 4000rpm.  The point being that this engine would produce
lower shaft speeds and might be more adaptable to a direct drive
application.  The moment arm of the eccentric shaft is longer, so for the
same force of the explosion in the combustion chamber, greater torque will
be generated.

Again, these are just neat and interesting thought experiments.  Who knows,
if Ed McMann calls tomorrow with my $10 million, maybe I'll try to build one
and find out why it won't work.  At least I'll learn something.  

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org