Subject: 2 Sided Rotor - Diesel
From: Paul
Date: 2/6/2000, 4:19 PM


Bill Marvin wrote:

Some additional thoughts on my totally unoriginal
idea:
The rotor speed in a 3-sided rotary is 2000rpm at
an output shaft speed of
6000rpm.  With the same rotor speed in a 2-sided
rotary, the output shaft
speed would be only 4000rpm.  The point being that
this engine would produce
lower shaft speeds and might be more adaptable to
a direct drive
application.  The moment arm of the eccentric
shaft is longer, so for the
same force of the explosion in the combustion
chamber, greater torque will
be generated.

Again, these are just neat and interesting thought
experiments.  Who knows,
if Ed McMann calls tomorrow with my $10 million,
maybe I'll try to build one
and find out why it won't work.  At least I'll
learn something.

This quite interesting - I have run 4 and 5 lobe
rotors on my BASIC generation/animation program, But I
think I have not done 2. Each flamk does only one TDC
per rotor
rev, so for a 4 stroke you would need to valve for one
of those to be end of exhaust start of intake. The
other possibility would be to make it an externally
scavenged 2 stroke. In either case the valving would
be challanging - Vance

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org