Rodger Hilyard wrote:
fixed pitch 70X78 const spd var gear
mph rpm bhp f lbs eff f lbs eff f lbs eff
0 1940 108 407 0 603 0 525 0
30 1950 109 393 28 530 26 505 25
60 1960 110 353 51 480 50 460 47
90 2080 118 327 66 425 63 420 62
120 2400 130 307 76 366 73 365 73
160 2500 149 283 81 299 80 299 80
190 2720 160 268 83 268 83 268 83
Yada, Yada, Yada......
Paul you obscure the point.
The point being, that a variable speed reduction unit could
provide a performance increase for short field and obstacle
clearance and be more COST and WEIGHT efficient than;
(1) a reduction unit plus a variable pitch prop and
(2) much better than a reduction unit plus fixed pitch prop alone.
Rodger
Not really :-) It has taken me this long just to get Vance
to agree on the same definition of prop efficiency and fixing
Vance's chart for the constant speed prop. I would not say shifting gears
or the infinitely variable gear box is much
better. It certainly would not have a cost or weight advantage.
If you choose an automobile transmission of some sort it is going to be really
big and heavy to take a continuous 150 HP. We are now only using a very small
part of the Ford C6 auto transmission. We are only using one set of gears
out of the two that are in there and none of the other very heavy parts
such as the torque converter. The output shaft would still have to
be increased in size and bearings added to take the prop gyro bending
and thrust loads. Automobile transmissions are not designed for those
loads.
Where are you going to get a infinitely variable gear box?
BTW This is Vance's chart, not mine.
I will let what I said last night sink in with Vance and I will then
go after the infinitely variable gear box :-) Patience!
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org