This is from the 1981 edition of Kenichi Yamamoto's book
Rotary Engine. Page 6.
1.3 REQUIREMENTS FOR A PRACTICAL ROTARY ENGINE
Although various types of rotary engines have
been developed to date, there are few that do not qualify
as internal combustion engines or do not qualify as a
practical engine even if they satisfy the qualifications
of an internal combustion engine.
The requirements for a rotary engine to be qualified
as a practical internal combustion engine can be
summed up in the following five items. The practicality
of various ideas on rotary engines can be judged by
evaluating them by these criteria:
(1) Every moving part, including the timing
mechanism, should make a rotating motion.
A mechanism having a reciprocating inertia
will increase mechanical noise and vibration, and
will work against high speed and high revolution.
Accordingly, structures that require intake and exhaust
valves and mechanisms using the rotors oscillatory motion
are not desirable.
(2) Gas seals or the working chamber should
be three dimensionally reliable.
The gas seal mechanism of a rotary engine
should be constituted by connecting the individual
seals three dimensionally. Among the many
ideas we come across are those that do not show
such three dimensional thoughts.
(3) Appropriate gas exchange of intake and exhaust
should take place.
Together with having a mechanism that
can correctly open and close the ports, sufficient
time for intake and exhaust should be provided
especially for high speed and high revolution.
Among the ideas on rotary engines, there are
some that ignore this point.
(4) Every component part should have the strength
to endure high speed and high pressure.
As the component parts are exposed to high pressure,
high sliding velocity and high heat load, every part should
have sufficient allowance in size and in shape.
(5) Sufficient cooling and lubrication should be
provided.
In order to qualify as an internal combustion
engine, although this is related to above (4),
durability against high heat load, high sliding velocity,
etc. are required. Therefore, the structure
should be simple, and the ideas on rotor cooling,
lubrication of seal parts, and oil seal structure should
be those that are given adequate thought.
Also, it is desirable for a practical rotary engine
to have a simple and compact structure. When we.
evaluate the various types of rotary engines devised to
date in view of the above-mentioned requirements, the
NSU Wankel type rotary engines is the engine that best
satisfies the above mentioned requirements.
The NSU Wanke1 type rotary engine will simply
he called a rotary engine, and the reciprocating piston
engine will he called a reciprocating engine herein
after.
End of quote.
And never the twain shall meet! PL
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org