Subject: Nickasil aluminm end housings.
From: Paul
Date: 2/8/2000, 1:27 PM

More BMW Nickasil aluminum engine block woes.

I still say steel is the way to go.

Paul Lamar

You can find out if a "chip"-hot engine fix was installed by searching
back to the dealer where the car was originally purchased or leased-BMW
has good records of all service activities. You can also contact BMW of
North America on the Web, and they'll have a service record file on your
VIN also...as well as any recalls done. There were a couple small
recalls for the '94 740i, as I found out from BMW of NA, that hadn't
been installed on my VIN....(new brake light switch and a new
throttle/cruise control cable bracket).

With only 26k miles I doubt you have a replacement "Alusil" short
block..and hope you don't have the "half-ass' "chip", hotter running
engine fix, which only delays the inevitable. The ONLY CORRECT fix is a
new short block replacement of a properly treated "Alusil" (or Nickasil)
Al block (cylinder walls).

In my case, my '94 car had a new short block installed in Feb. '97 @ 50K
miles..and never had the so-called "chip" fix installed. Both the
original BMW dealer and BMW of North America had records of this.

Hope this helps.     Arnold

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org