Subject: Nickasil aluminum end housings.
From: Paul
Date: 2/8/2000, 1:14 PM

Here is the UK source I suspect.

http://www.motrac.demon.co.uk/cylinder.htm

Our prices are always competitive and quality is second to none.

Cylinder re-plating (prices excluding VAT )

 Service
                                  Price(£)
 Single
                                   £79.50
 Twin block
                                  £117.50
 Repairs
                               £25 Per bore
 Machining
                               £15 Per bore


Trade and bulk order prices available on request

Trade and overseas enquiries always welcomed

steve@motrac.demon.co.uk 

Telephone: 0151 357 1062
Fax: 0151 356 7330

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

cylinder.htm
Cylinder Replating

Home | UK sales info | Overseas sales info

Cylinder Replating


General information:

Since the mid 1980s Motrac has offered a complete cylinder re-conditioning service for plated cylinders.

We have an enviable depth of experience in this area and aim to provide the best service to customers worldwide.

We can repair and re-plate your cylinders to the very highest standards. We differ from the occasional electro-plating plants who offer this service in that Motrac is primarily a race engineering concern that understands the end use and application of the components better. We use this knowledge to give you a finished product which is ready to use and well suited to your application.

Most high performance two-stroke and now many fourstroke engines rely on coated cylinder bores.

A hard surface coating typically Nickel-Silicon-Carbide, Chrome or some variation of the two is applied directly onto the aluminium cylinder bore. When this becomes worn or damaged you may require our services to help restore your cylinder to as new condition. Likewise if you are producing a new cylinder and wish to have the bore coated with Nickel-Silicon-Carbide (commonly called Nickasil) then we can help.

Most cylinders no matter how badly damaged can usually be repaired. Cracks, gouges, scores and detonation damage can easily be mended and nearly always at a fraction of the cost of a new cylinder.

Once repairs have been carried out and the cylinder has been re-plated we always dress all the port edges, relieve exhaust bridges (where applicable) and thoroughly clean and inspect every cylinder prior to despatch.

Prices:

Our prices are always competitive and quality is second to none.

Cylinder re-plating (prices excluding VAT )

Service Price(£)
Single £79.50
Twin block £117.50
Repairs £25 Per bore
Machining £15 Per bore

Trade and bulk order prices available on request

Trade and overseas enquiries always welcomed

steve@motrac.demon.co.uk

Telephone: 0151 357 1062
Fax: 0151 356 7330