Subject: Tracy's fuel injection and fuel return.
From: Paul
Date: 2/8/2000, 7:26 AM

Jim Sower wrote:

I would have guessed that nearly everyone would want fuel flow on their panel.  I
sure do.  Doesn't that require that bypass fuel be returned to the system
downstream of the flow transducer?  It would seem that would require a sump
downstream of both the selector and flow transducer.  How much (as a portion of
total flow) fuel is bypassed anyway?  And if one ran a finned fuel (return?) line
upstream of the radiator, wouldn't that suffice?  Seems strange that the only
viable way to have fuel injection has to be give away accurate fuel flow
readings.
Just a theory ....       Jim S.

The neat think about EFI is the computer knows how much fuel it is squirting
into the engine. It knows the pulse rate and width of the pulse so it can add
up the total amount of fuel injected in unit time. Tracy's system has taken
this one step further and has the ability to take in the ground speed from
a GPS through an RS232 interface and read out, not only fuel flow, but 
actual MPG on the instrument panel. No flow transducer required.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org