Subject: Aluminum end housings.
From: Paul
Date: 2/9/2000, 4:49 PM

Bill Freeman wrote:

           BIG SNIP

I still think it is preferably to a thin nic-a-sil coating as once that
goes the seal could dig into the soft aluminum end housing and fail the
engine catstrophically.

Paul Lamar

The service history of nikasil is essentially unblemished.  A typical
911 sees at least 200K miles with no cyl problems.  This was used
on th 917-30 - very high MEP!  Assuming you can get OEM
quality of coating, I still think that this is THE solution.  Don't know
about cost.

Bill


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org