Subject: Tracy's fuel injection and fuel return.
From: Paul
Date: 2/9/2000, 7:35 AM




Jim Sower wrote:

<...  knows the pulse rate and width of the pulse so it can add up the
total amount of
fuel injected in unit time ... >
That's pretty trick if it's as accurate as a flow transducer.  What does
it cost?


Yes I would say it was.
Correct me Tracy if I am wrong. $800 for two completely redundant and
interchangeable
systems. Controls the spark in the bargain. For more info check Tracy's
web site.
http://www.rotaryaviation.com

Paul Lamar


Tracy Crook wrote:

I should clarify this. Paul is correct about the general features and the
way my fuel flow readout works.  The EC2 engine controller does put out the
fuel flow information (and a bunch of other stuff) on a serial data line.  I
have the prototype readout in my plane but the production version is not out
yet.  These darn re-drives are taking all my time lately.  In any case, the
readout will display things like engine inlet air temp (or manifold air temp
for turbo installations), manifold pressure (absolute), RPM, fuel flow in
GPH, total fuel used since reset, MPG (if hooked to your GPS data link),
air fuel ratio (requires an O2 sensor in exhaust system to work) and a bunch
of stuff related to the mixture correction lookup table.

The display is not needed for the EC2 to work and is an extra cost option.
I expect it to be available in about 6 months.  Cost is still not determined
but it will be much less than anything comparable on the market.

Tracy Crook
rws@altavista.net
http://www.rotaryaviation.com


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org