Subject: Aluminum end housings.
From: Paul
Date: 2/10/2000, 2:27 PM


Paul: Thanks for your interest in US Chrome. We do not price jobs by the
square inch. Block configuration, bore diameter and volume are more
relevant to the price of the process. The best alloys for us to plate are
380, 356, 360 or 4032. Pleasr feel free to contact me with any other
questions you may have.    Scott Reath, US Chrome

Paul wrote:

Jeff, which of these alloys would you recommend to cast the end housings from?


Paul

380 = Die castings ultimate and yield at 212 deg F is 45 and 24 KSI

356 = The most common casting grade, good for sand castings, easy to cast
well, Ult/yield @212 is 32/24 out of sand for 356-T6

360 = die castings 44/25 with good castability for thin walls

I've never heard of 4032 as a casting grade or anything else for that
matter.  ALL engines are cast from 356 or something close to it

Jeff Spitzer


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org