Subject: Turbine oil/ 2 stroke oil WAS: Oil inj reqd?
From: Paul
Date: 2/16/2000, 5:08 PM


We tried Mobil JEO (?) turbine oil in the Deere rotaries at one time. Worked
OK from a wear point of view, but it seemed to leave more deposits than we
would have liked. We could have been overoiling, it was a quick test without
proper controls. I think the two stroke oils are designed for an environment
more like the rotary than are the turbine oils, but the turbine oils are
certainly worth looking at (IMHO).

Jon Lauter
Rotary Power Marine Corporation
www.rotarymarine.com

Seems like the turbine oils are designed for a pretty benign environment
compared to two-stroke oils.  Typically they lube and cool rolling element
bearings and are not exposed to extreme temperatures (like burning).
Also, they are not specifically designed to be consumed in the combustion
process, so I assume that they are likely to have a lot more residues.
The two stroke oils really seem like the best choice, but clearly std
auto sump oil works fine (on the street), so in an emergency, seems like
any oil would probably protect then engine from destruction, but probably
at the cost of increased deposits, possibly somewhat increased wear.

On ounce per gallon @ 12.5 gph (200 hp x 75% x 0.5 bsfc) is 12.5 ounces
per hour.  On a 5 hour trip (say 800 to 1000 nm) you will burn 62.5 ounces.
This is almost two quarts ( 32 oz per qt), so carrying about 4 qts will permit
you to start full of gas, fly 1200 to 1500 miles out and then return without
needing any additional oil.  Sounds kinda OK to me.

Bill


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org