Subject: oil injection required?
From: Paul
Date: 2/16/2000, 3:34 PM

Archie wrote:

I think this has come up before but if I were out of my usual 2 stroke
oil
at an airport far from home, I'd just add some AeroShell AD (ashless
despersant) or equivalent available at any airport and fly on.  I used
to
use this stuff in those wretched drone engines back in  my Gyrocopter
days.
This stuff burns much cleaner that automotive oil.  It has to because as
Paul pointed out,  there are a lot of Lycomings & Continentals that burn
a
heck of a lot more oil than the 13B rotary.

Tracy Crook
rws@altavista.net
www.rotaryaviation.com

Which brings this to mind. I built an O-360 that now
has 331hrs and has consumed less than 3 quarts of
oil. Monitoring it's condition on a regular basis with
oil analysis, and when it reaches around 700 hrs.
will be publishing an article on what was done.
This is not rocket science.
The work was radical by FAA standards, but
trivial to a racing engine shop.
After all, would you buy a new car if told it is
powered by 60 year old technology, and will consume
a quart of oil every 8-12 hours?

It did cost a bit more than a standard overhaul, but the
next major should be pennies in comparison.
Had hoped to do a seminar at OSH on this, but he
will not likely have the time built up for evaluation.
Will answer some specific questions, but will not
reveal all until it is close to mid-time, and hopefully
will go far beyond. Who knows?
Archie


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org