Vance Jaqua wrote:
The snap ring retention scares me - stress conc in the
grooves, and snap rings in generall - Vance
Common prop design practice. That 4130 heat treated steel tube is way over
designed for carbon fiber blades. I will size it so the stress level is below
10K if you like. :-) Also use two snap rings per blade.
the screw on part of the blade can also incorporate a sleeve that will
positively lock the snap ring in place with no possibility of becoming
dislodged.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org