Subject: cs props new all steel hub.
From: Paul
Date: 2/21/2000, 5:31 PM

BTW one newton  is equal to .22481 pounds. God, I hate the 
metric system! I should have up loaded the next page for the 
95 mm shaft wherein it rates that snap ring at kN or 215,000 Newtons
or 48,000 pounds as long as we are not going to Mars.
BTW this rating has a safety factor of four it says here in 
fine print at the bottom of the page!

If the blade weighs 5 pounds and the blade CG is 1.5 foot out at 3000 RPM
it is going 471 feet per second. Mass of the blade is .155 slugs.
I get 23,000 pounds of force for a 5 pound blade. F = m*v^2/r
Most of the weight of the blade is really near the hub so this is a very worst
case scenario. I will put two snap rings in there for insurance.

Check my math.

Paul Lamar

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org