Subject: cs props new all steel hub.
From: Paul
Date: 2/21/2000, 11:33 PM

tcarrico wrote:

<snip>

This is the top view. the side view will follow. Any questions
or suggestions?

<snip>

I have been thinking about this for some time.  I do not have
access to CNC equipment, but could get a simple Mill/Lathe
and do some simple machining.  I only need two. (one spare).

This latest design was to minimize the need of a mill.
A simple lathe should do most of it. The yoke slots need
to be done on a mill but a rat tail file would also work.


A while back someone mentioned that three blades were easier on
shafts than two, but I think he was refering to aerobatics.  I
would really like a three blade but think the complexity may be
out of reach.  Has your view point changed on that?

Much more complicated but could be done.


I would like something easier to manufacture.  You are using a
threaded insert to attach the blade to the hub.  How difficult
is that insert to make?  How will you index it (the blade) to
the pin that controls pitch?  How much of this are you planning
on making your self?

Pretty easy if you know how to cut threads on a lathe.
I had the idea that I might use a large jam nut to index the blade
to the prop shank. All of it but it might be awhile. My lathe
is capable but I may not have the time and farm it out.
If you want to make two sets of parts I will pay you for a set.

There are a few more details so a set of part drawings are in order.
I would also like to test it on a stand that was capable of a
continuous  sine wave oscillation in the pitch axis of 60 degrees per second
while the prop was rotating at 2500 RPM or so. Tracy has a test
stand that he might loan us. Be a good test of his PSRU too while
we were at it.



I am also thinking about the Bicambered Airfoil.  Since that is
suposed to operate at higher angles of attack for the same HP a
Constant Speed prop should allow you to get a lot of performance
per HP.  The trick would be manufacturing the blades.

Still thinking...

I kind of doubt it on that bicambered airfoil. You would have thought
NASA or NACA would have tried that long ago fooling around in 
wind tunnels for the last 100 years the way they have. I guess 
I am skeptical. If it really worked you would hear more about it 
as it is easy to verify.
 
Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org