Subject: cs props new all steel hub.
From: Paul
Date: 2/22/2000, 8:13 AM

Richard Sohn wrote:

Checked your math, I blieve the velocity v schould be angular velocity
"omega" which in this case would be 314/s. Short formula is "pi*RPM/30".
Makes the outcome a little better too.

Richard.


Not in Force = (M X V^2)/radius 

That velocity is tangential velocity.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org