Subject: cs props new all steel hub.
From: Paul
Date: 2/22/2000, 11:48 AM

Russell Kent wrote:

Paul wrote:

I am thinking of doing a computer program to add up
all the incremental mass forces along the blade radius. Do you have
a math function for typical mass distribution verses blade radii?
Lacking that a simple way of estimating/calculating the area of a wing rib?

I don't think you need the actual area of the blade rib.  Assuming the blade's
airfoil is the same from root to tip, then the blade rib area should be proportional
to the bounding rectangle for the rib.  So all you need are two functions:

    L(x) = length of chord of blade rib at station x
    W(x) = thickness of chord of blade at station x

Plus you need the density factor (K_density) that is the average density of a slice
of the blade including the bounding box's air.

Integrate:
    L(x) * W(x) * x * K_density
to get the approximate moment distribution.

Russell Kent


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org