Subject: cs props new all steel hub.
From: Paul
Date: 2/22/2000, 4:10 PM

Russell Kent wrote:

Jeff Spitzer wrote:

Neither.  You can try to calculate it or you can measure it two ways. 1)
Measure the mass, c.g. and intertia of the blade about the c.g. and use
parallel axis theory 2) Cut the blade into little pieces.  The latter is
more accurate.

Don't forget to add the kerf material back.

Russell Kent


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org