Subject: cs props new all steel hub.
From: Paul
Date: 2/22/2000, 7:36 PM

"Daniel L. Leclere" wrote:

There is a formula for calculating this without destroying the blade:
The blade is weighed
Hung from what would be its' Center (hub center)
Swing it as a pendulum and time the cycle time with a stop watch (I used a
number of cycles and divided for
more accuracy)
and the rpm was worked in
The formula gave the force trying to make the blade free
I will send the formula on but it is in my helicopter builders log in my
hanger.

Dan  http://woodbug.paconline.net


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org