R c wrote:
Using waste heat exhaust for propulsion
A while ago there was a discussion here in regards to propulsion and exhaust
heat. Has anyone ever attempted to create a secondary propulsion system
using the waste heat from the radiator and exhaust??
The problem with this is; it don't work very well. Yes the radiator
can provide some thrust but barely enough to cancel the rad drag.
The best way to get propulsion out of the exhaust
is use a turbine and feed the mechanical energy obtained back into
the engine in some manner. This has been done and a 20% improvement
in power has been obtained with no increase in fuel burn.
See the ACRE NL web site for details on turbo compound engines.
A simple way is to make a high speed alternator that can be driven
by an exhaust turbine directly and feed the electrical energy back into
the engine by driving an electric water pump or other electrical
engine accessories like the fuel pump. This then saves the HP usually
used to drive the alternator and the water pump. The battery acts like a
gear reducer to convert the energy into a useable mechanical form.
There is way more than enough waste energy in the exhaust to do this.
This technique would be ideal for hybrid cars that already have large
batteries and electric propulsion motors.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org