Subject: oil/water heat exchangers
From: Paul
Date: 2/23/2000, 2:39 PM

Mike Wills wrote:

  Ive brought this subject up before but I'm looking at it again now. I'm
currently mocking up systems and would still like to use an oil/water heat
exchanger in place of a standard oil cooler. When I was looking at this and
discussed it with Fred Moreno (are you still on this list Fred?) it
appeared that none of the exchangers on the market had enough cooling
capacity to do the job for the rotary at a continuous 75% power. Does any
one see a problem with building one of these using a conventional air/oil
cooler of appropriate size? The plan would be to use a stock Mazda cooler
(or something of equivalent size) and enclose it in a box and then pass
coolant throught the core/fins on its way to the water pump inlet.
Something like this would make packaging in my airfame much easier. So what
do you guys think?

Mike Wills


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org