Subject: oil/water heat exchangers
From: Paul
Date: 2/24/2000, 10:48 AM


You might want to look at some auxillary device to remove heat from the oil
pan like Tracy Crook did, but instead of using a coil of copper tubing, use
a finned heat exchanger mounted on a baffle plate sandwiched between the
engine and the pan. That way, oil would be forced to pass through the heat
exchanger on the way to the sump. Just an idea.

Brian Trubee
Redmond, Wa


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org