Subject: oil/water heat exchangers
From: Paul
Date: 2/24/2000, 11:04 AM



Have you guys ever looked into using a watercooled oil cooler?

I'm using a Setrab 15 3/4 inch cooler in my 20B and it keeps the oil
temp
around 210 F during the summer months

This is the sight to look at the cooler

http://www.bakerprecision.com/setrab.htm
Leo Brandt

Bulent Aliev wrote:

Hi Mike, here is a message from the archives. Looks like someone is
doing it already and works well on 20B.
Bulent


Bulent,


Mike Wills wrote:

  I had an email conversation with Leo when he posted this. He is using the
Setrab TOC-300. His application is not an airplane. It's a sand rail. His
20B has been dyno'ed at +500HP, but the problem as has been stated
repeatedly here is that the engine in this type of application will be
producing nowhere near that much power for extended periods. In just
chugging around the desert he will be producing less than 100HP. So it
seems that this is an apples and oranges comparison.

  And he did tell me that his oil temps reach 220 regularly and
occasionally approach 240 when he is on the gas hard for extended periods.
I suspect that this cooler wont do the job for an application requiring a
continuous 75% power output.

Mike Wills

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org