Subject: oil/water heat exchangers
From: Paul
Date: 2/24/2000, 11:06 AM


R c wrote:

Mike,

I'm working on the same problem.  What sort of aircraft are you working
with.  I've got some design ideas that I'm working with but I need to work
on the numbers.

Also, do would you know what the heat energy/radiator dimensions are
required for a 13b.  I seem to recall a formula for calculating the cooling
capacity for any given HP output.  Does anyone have any info on this?


Mike Wills wrote:

  My airplane is an RV4. Undercowl space is very tight. The radiator that
Paul is suggesting would be great but it simply wont fit in the space I
have available. Sometimes I wish I were building a RV6 instead.

  When Fred Moreno was on this list he did an evaluation of requirements
for my airplane. If I recall correctly the numbers he came up with were
approx 95,000 BTU/hr capacity for the oil cooler and 195,000 BTU/hr for the
rad. These numbers were based on info he got from others on the list about
BSFC, oil and coolant flow rates, etc... So of course they could be off
base if the numbers he started with were off. The suggestions he came up
with seemed to fit with what some of the guys who are flying are actually
using so I think they are pretty accurate.

  There isnt a standard for a radiator dimension that will work according
to Fred. The evaluation that he sent me presented 3 different core sizes
that would all do the job. As Paul says, the larger the surface area of the
core the lower the drag (assuming the diffuser efficiency doesnt change),
so my goal is to get the largest rad that will fit. Per Fred's eval, if
forced to use a smaller core, then to equal the cooling of the larger core,
more airflow (larger cowl inlet/outlet) is required. In my application Im
limited to a core about 14.5" tall.

  I think Fred sent his evaluation to the list so it should be in Paul's
archive cd. If you want, give me your email address and I'll send it direct
to you (if I can find it).

Mike Wills


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org