Bulent Aliev wrote:
Here is a nice one from the same web site:
Liquid Oil Cooler - Uses side tanks with the traditional plate heat
exchanger principle.
Very low pressure drop and optimal performance. 9" Wide x 9"
Long x 3
1/4" Thick.
-12 AN Oil Fittings And 1 3/4" Water Hose
This is the cooler that Niel K has on his Lancair. No success with it yet
but its unclear to me whether the problem is with the cooler or the
radiator. Neil is grounded due to weather in the great white north, and
some mods he is doing to his airplane. He hopes to fly again soon and have
more info but says he doesnt have much hope and is already planning to
install a stock Mazda cooler as Ed Anderson did to solve his oil cooling
problem.
This thing is also really pricey. Seems that you could save some $ by
building yourself using an air/oil cooler also from that same website as a
starting point.
Mike Wills
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org