Subject: stainless tubing
From: Paul
Date: 2/24/2000, 7:42 AM



Mike Wills wrote:

  A number of you recommended a home made tangential muffler made using
5"
- 6" diameter thin wall 321 stainless tubing. Anyone know of a source
for a
small quantity (16") of this stuff? Or do you "roll your own" by welding
up
some sheet? If so, how bout a source for the sheet?
  Ive looked at Burns and a couple of other sites as well as checking
with
local sources with no luck.

Mike Wills

Industrial metals in San Fernando CA probably has 321 stainless sheet.
Surely there is a metals supplier in the San Diego area. It is
widely used in industrial kitchens although I am not sure of
the alloy they use. It is unlikely that you will find 0.035
321 SS tubing although it is listed in my old Tube Sales catalog.
Tube sales has merged with another company. I will see if I
can look them up.

Paul Lamar


Tracy Crook wrote:

Bought mine at Wag Aero.

Tracy Crook
rws@altavista.net
www.rotaryaviation.com

That should have been: 

"It is unlikely that you will find five inch diameter 0.035 321 SS tubing"

Does Wag Aero have five inch Tracy?

Paul Lamar

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org