John O'Cain wrote:
This has nothing to do with adhesives but... I just read two interesting
articles in March issue of Custom Planes. One on the Fadec. Is the same one
that you all have been talking about? The other article was on a Dyna Cam
engine. 200HP / 650 pounds of torque on 80 octane fuel. Haven't seen any
comments in your list or did I just not read em? Some time my light is on
but I'm somewhere else.
John
We discussed the dyna cam engine quite some time OK. IMHO the
main problem is it has too much torque so you need a really big
prop which means a really long landing gear. Either that or a five
blade and give up prop efficiency. It is a twelve cylinder engine with
a lot of displacement and that is why it has so much torque. It also has
a line contact between the piston roller and cam which limits the RPM
and HP per cubic inch. It is like a monster cam shaft and you know what
kinds of problems you can have a with a cam shaft.
Paul Lamar.
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org