Subject: english wheel RV4 al cowling
From: Paul
Date: 2/28/2000, 3:34 PM

Gary Wolf wrote:

Brian,
   I have an English Wheel and a power hammer and have been building
fenders, cowl, and noses for vintage race cars, usually in .060 aluminum
from 3003H14 sheet. Thinner aluminum and harder alloys are possible too but
take longer. For example a .016 blister in 6061T6 with dimensions 6" x 12"
is a more difficult part to make than the same part twice the size in .040
3003H14.
   If you are interested in having a quote, send a drawing as an attachment
or fax to 519-648-3030

                                                Gary Wolf
                                                Cambridge, Ontario
                                                Canada


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org