Perry,
This is my suggestion for aligning the wood core with the hardware store
conduit coupling.
BTW according to Composite Basics the bond between epoxy and steel is
about 3000 psi so our factor of safety here is about 2.5 based on a blade tensile
force of 20,000 pounds. Machined mild steel is one of the best materials
to bond epoxy to.
The outside area of the coupling is about 16.6 square inches so
the shear stress between carbon/epoxy and steel is about 1200 psi.
This is not counting the mechanical lock of the carbon fiber in the
sine wave coupling. One of the neat things about
the conduit coupling, besides being real cheap, is they are the same
all over the U.S. so blades should be interchangeable.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org