Archie wrote:
In the drag engines, we want as much vacuum as
possible in the crankcase. This does several things,
but foremost, is the differential between above
and below the rings. The type or ring used is low
drag, and in many cases a dykes style top.
In Nascar types it is similar with as many as
five scavenge sections, and one pressure.
We also enhance this with lines from the valve
covers to the exhaust collectors and check valves.
Considerable vacuum is generated in this manner
alone. In some cases, we install the crankshaft lip
seals in reverse to reduce the loss of vacuum.
Archie
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org