Subject: Vacuum Pump/turbo pump
From: Paul
Date: 3/11/2000, 7:17 AM

Chris Gentry wrote:

Is it possible to tap into the vacuum side of the turbocharger to get a
vacuum for the gyros?  Could a short intake stack be used for the tap point
for a venturi effect.  I'm sure there is a lot of sucking going on at the
input of the turbo pump.
Best Regards,  Chris Gentry

Grumman Cheetah, Glasair(Rotary) & Dragonfly

The pressure drop across the air filter is on the order of one to two inches
of Hg. (Mercury)  One inch of Hg is about .5 psi. What the instruments need is 
ten times that amount or 5 psi as I recall. Another way of looking at it is 
sea level is 30 inches of Hg or 15 psi. So you would need 10 inches of Hg
to operate the instruments which would severely restrict the power to
about 2/3 of normal. Did I make a mistake here?

No way for me to know for sure without trying it but I suspect if you had a big 
enough venturi in the exhaust for cruise vacuum you would also restrict 
the takeoff power.

Paul Lamar

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org