I was looking through the JC Whitney catalog for suitable fans for
building a wind driven drop down alternator and found a 9 inch version P199
that needed 5.5 amps for $48. The motor is the flat kind so it is probably
a solid state brush less type. This can probably be modified to make it
a perm magnet 5.5 A alternator by disconnecting the coils and adding diodes.
The life is not much of an issue as you will only need it once. You
might have to removes some blades to keep it from over speeding.
BTW on the facing page I saw how they rated transmission coolers
by gross vehicle weight. Makes sense as all grades in the country
are 7% plus or minus so the HP required to get a load up a
grade is mostly a function of GVW. Waste HP (heat) going to the
transmission is also a constant at about 3% plus or minus.
The other interesting thing about that particularly ad was a 3/4"
thick 11 X 12" was rated at 22,000 GVW while the same size cooler
twice as thick was only rated at 28,000 GVW. Shows to go you
there is a lot of truth to the contention that the first half
of the cooler does three quarters of the work. Making it much thicker
does not help much.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org