Terry Adams wrote:

Attached is a photo of my intake mainfold.  It is fabricated from 1.5" mandrel bent
aluminum tubing.  The center pipe is divided for most of its 22.5 inch runner
length to prevent pulsing.  Not shown in this photo are the machined bosses I
welded to each of the secondary intake runners which mount the secondary
injectors.
Thank you for hosting the newsletter.  Keep up the work on the constant speed prop.

Terry Adams

That's a beaut Terry. Looks like it will work well.
Thanks for sending the picture.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org