Perry Mick wrote:
Paul wrote:
Sounds great Perry. Be sure to wipe those steel things off with solvent
before you bond to them. As I understand it even finger prints can affect
the bond. Have you figured out how you are going to get the fibers
down into the sin wave grooves when doing it in a mold?
Well, I just looked at your drawing from 3-8-00, looks like you have
about 8 sin depressions for a 2 inch long coupler, so they are only
1/4 inch apart, if that drawing is to scale. Looks like the part
of the blade that "clamps" the coupler should not be in the mold,
but extend past the end of the mold, with the coupler jigged in
place somehow relative to the mold. That way the glass can be
"clamped" around the coupler and forced into the depressions
during cure.
sounds good I suggest a a peel ply and a plastic flim over the bottom or top
whatever the case may be and rubber bands around the lay up to force the fiber
into the grooves. You will know more when you get them on friday
Paul