Tracy Crook wrote:
> It is becoming necessary for me to do more strategic business
planning if I
> am going to retain my sanity. In the long term it looks like I
need two
> versions of the display, one that just does the basics (fuel flow,
fuel
> total, MAP, rpm, inlet air temp) and a second "page" for the
programming
> parameters since these only need to be displayed on rare
occasions. The
> other version would add all the other engine monitor functions
(temps,
> pressures, etc.).
>
OK since Tracy is planing on two units I will go with a 20 X 4
display
which will save cost and panel space. A 40 X 4 character display
would have to
be at least 7 inches wide.
The panel cutout will be roughly 2.35 inches high by about 5 inches
wide
unless everybody wants standard radio width of around 6.25 inches as
I recall.
Lets hear your votes on this.
The display window will be about 1 by 3 inches.
The two page grouping will look something like this:
RPM XXX0 MPG XX.X
GPH XX.X XX.X gal tot
Intake Temp XXX deg
MAP XX.X inches hg
012345678901234567890
1 2
MS XXXX SPK XXX
TA XXXX SF X
TD XXXX
O2 XXX
012345678901234567890
1 2
Comments?
Paul Lamar
"Rosine, Steve" wrote:
Will this work with the EC1 or only the newer EC2?
Steve Rosine
Good question. I suspect only the EC2. Tracy?
BTW Steve please set your left margin to zero.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org