Just copy this prop Bill :-)

Picture by me.

Paul Lamar

Vance Jaqua wrote:

If you have close to 4000 hp that is a pretty good
design- near the tip it must be down near a couple
percent thick - Vance

I was joking of course Vance :-)
It is beautiful is it not?

Note how the spinner is streamlined around the blade roots
at top speed. (With cuffs)

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org