Went up to see Chuck Harbert's airplane after his in-flight fire.
Chuck Still is not sure where the oil leak is and won't be until
he can run the engine again.

The subject of the cost of Mazda injectors
came up. The Mazda dealers are asking $400 each and some repair shops
might be able to sell them to you for $225 each. this is way out of line
for what they should cost. GM, Nippon Denso or Bosch injectors go for

around

$70 each so if you are building a intake manifold be sure to design in GM,
Nippon Denso or Bosch injectors rather than Mazda injectors.

Contact Kinsler Fuel Injection for injectors rated to your needs.
and a catalog.

(248) 362 1145 FAX (248) 362 1032

Kinsler also has U bends for intake manifolds in SS and Al.
Tell Jim Kinsler that Paul Lamar sent you.

Also http://www.rceng.com

Paul Lamar

Ed Anderson wrote:

I can second that!  Even Mazdatrix is asking over $200 for an injector.  I
attempted to use my MDS injectors however, they are slightly too large in
diameter to fit the stock 13B injector holes.  I could find no cross
reference between mazda injectors and other makes.  There are some folks
offering Cleaned used Mazda injectors for around $65.

Ed

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org