Subject: Fuel injection PSI
From: Paul
Date: 4/17/2000, 6:08 PM

Rich wrote:

I did buy the Andair fuel selector with return. I do want to return
the fuel to the inboard tank but the outboard tank is T'd to the
inboard tank. My question was if the inboard tank would overflow or if
the inboard & outboard tank would equalize (inboard & outboard tanks
are in both wings, 4 total).

I got an answer today by a physics teacher (it sounded pretty good).
He said that if I use 3/8" fuel line to feed the engine & 1/4" line
for the return then the inboard tank won't overflow... also something
about the slight pressure in the inboard tank from the return fuel
which won't allow the outboard tank to flow as fast as the inboard.

Thanks
Rich


I thought it was obvious that more fuel is sucked out than is
returned. I don't think you need the line size disparity. 
Are you going to have separate vents for each tank?

In my experience with Cessna's the tanks rarely equalize 
for some strange reason.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org