Paul, if you inject the fuel too far from the intake port you run the
risk of
icing up inside the manifold. This would be the same as a carb icing, so
you'll
need a provision for carb heat.
Chuck

That is the first I have ever heard of that happening.
I always thought carb icing was caused by the venture.
Do you know someone that has had this happen?

Paul Lamar

Although the mixture may contain supercooled water vapor, there should not
be anywhere for ice to form e.g. obstructions.  The issue with the carb is
that the venturi is a supercooled obstruction.

Jeff Spitzer

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org