Subject: IVO Magnum [new "High Pitch" version]
From: Paul
Date: 4/18/2000, 9:13 PM


Marv, please take a bubble protractor over there and measure the pitch
one foot out from the center of the spinner on the back side of
each blade when it is horzontal and let me know what they are.


Al Gietzen wrote:

BTW, from all these discussions about measuring pitch, I get the impression
that you're taking the angle of the back side as pitch, when the true pitch
is of course the chord line between leading and trailing edge.  Can make
quite a difference further in where the blade is thinck.  Oh well; I'm sure
you knew that.

Al

These IVO's are pretty much Clark Y's so the difference can be determined.
So far they have been as much as 15 degrees off. Way more error than
you would get by measuring the real cord angle as opposed to the bottom.
I hate to see people buying these things for rotary powered airplanes.
Dave Atkins should be going way faster than 180 MPH. 

I love to see people buying them for everything else however :-)

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org