Bulent Aliev wrote:

Hi Paul,
today I found a 6 port brass valve designed for fuel injected systems for

$245 .

In my case with the CZ MK-IV will solve most of my fuel delivery

problems. It has

Left tank, Right Tank and Off positions.  Since will be mixing oil in the

fuel,

lubrication is not a problem. I don't have to build  sump tank etc.  and the
return fuel will go back to the selected tank. Only extra work will be

running

return lines that will have to be done anyway.
One draw back is that it weighs 2.5lbs. but will save me $200 from the Allen
valve?
Bulent

Yowee these valves are expensive.  But, this is a seriously important
item, so good quality is important.  I assume the '6-port' means you will
route the return fuel back to the same tank?  If so, this makes fuel mgmt
pretty simple.  Is this a manual valve or electically operated?  A/C or
auto?  ( I assume A/C).  Sounds like a good solution if I understand this
correctly.

Bill
Long EZ builder & pilot
mechanical engineer

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org