Subject: Plan D for pump in tank
From: Paul
Date: 4/24/2000, 6:06 AM

George Lendich wrote:

George Lendich wrote:

Remembering that I have NO experience in this particular area; and there
has
been great discussion on fuel return and the possibility of pumping fuel
overboard, I was thinking in my own mind why doesn't someone use a float
type cut-off valve, you know when a tank is full, the float is up and the
valve is off and it's automatic- would this not work ? I can't see how it
wouldn't.

George (down under)


The only problem I can see with that is fuel expansion in the hot
sun. Might over stress the wing tanks if the floats seal off the
vent line.



Sorry Paul, what I was thinking was the float cut-off valve being on
 the 'T' return line (to tank with the vent) . Once that was full it would
 automatically go to the other tank (which had no obstruction).

I believe this will solve the problem with losing fuel (through the vent)
 because of overfilling (by return line), but their could be other factors
 such as-do you wish the fuel to go in any particular tank (for any
particular reason).


I am really sorry that I mis-understood that. That sounds like a great 
idea and could solve all the problems of these low wing birds.

I will draw it up.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org