Subject: 89 four port intake manifold
From: Paul
Date: 4/26/2000, 8:08 PM


Paul wrote:

 Anyhow the manifold is off of an 89 turbo II. Or at least that is what
the guy I bought the engine from told me. I am still receiving your
newsletter and will reply to any questions as fast as I can.  Thanks, James
P.S. Can't tell you how nice it is to be on your E-mail list without ever
receiving a virus. Thanks for the good and hard work.


Linux don't do virus :-)

Thanks Jim I was just about to upload it and see what people would say.
Here is the picture anyway.

Anybody have any idea what these devices are for? Looks like air
injectors or some such. Just curious as we don't need them I am sure.

Paul Lamar

Scott Gettings wrote:

I'm not sure what the parts are either, but that manifold looks like it weighs
50# !  No wonder you guys are working so hard to make new ones.

Scott Gettings


Its only about eight pounds measured on my cheap fish scale but that is
only half or less of the stock tuned intake system. The big issue for aircraft use
is the bulk and how high it makes the overall engine. A tubing manifold
made from .035 or .040 wall would of course be a LOT lighter.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org