Subject: Switch and circuit breaker
From: Paul
Date: 4/27/2000, 10:41 PM

John Slade wrote:

Scott Gettings wrote:
As an alternative, has anyone had experience with the EXP bus system?
Several of my buds with homebuilts have, with an overall positive
experience.

http://www.controlvision.com/frame.cfm?link=avionics.htm

I don't, but I'm hearing great things about it from another Cozy builder,
Wayne Hicks.  Wayne helped George Shell put one in George's LongEz.
Apparantly it was a breeze to install and has been trouble free for 18
months. Save's a lot of wiring, I'm told.
John Slade

That is a lot of money ($250) for what is about $70 worth of parts.
Those poly circuit breakers are about a buck apiece on page
32 of the Allied catalog. They are called Multifuse PTC Resettable
Overcurrent Protectors. The quality of the switches used is still
in question. PC board switches can cost anywhere from  five to ten
dollars each depending on the quality. None of those printed
circuit board switches are of the same quality as the switch/CB's I 
mentioned. No salt spray, no life cycle specs, etc., etc..

I would find out the brand name and part number of the
switches used before I would buy one of those systems.
They look like C&K switches which are not very high quality.
Probably about five bucks each. I have used a lot of them and I 
was not impressed.

http://www.ckcorp.com

I could make my own PC board system if I wanted to go that route. 
That way I could be sure of the quality of the switches used.
Let me know if you want me to design a PC board that will
accept those parts. Should take about an hour. If enough 
people want it I will do the design and you can have your 
own PC boards made or someone on here can organize
a group buy. I have a bunch (probably about 50) of the 
type of connector they used for the wires.

I am still going with the switch/circuit breakers as I can essentially
do the same thing by drilling a bunch of holes in a copper bus
bar and screwing it to the lugs on the switch/circuit breakers
mounted side by side. I know these switch/CB's are about the 
highest quality you can buy. Call me old fashioned :-)

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org