Jeff Spitzer wrote:
At 09:48 AM 4/26/00 -0700, you wrote:
My question for Jeff is "what are the noise effects of stators behind
the prop?" I'm installing my old duct1 stators now in duct2, have never
flown with stators yet. Of course these have to be on radials, but I'm
not sure what distance to place them behind the prop either. I'm making
the whole 7-blade assembly removable so I can relocate it.
--
Perry J. Mick
Mick Duckt N7XR
http://www.ductedfan.com
I'm not sure about stators behind. It's important to have a different
number of stators vs. blades or else the vibration and noise will be very
bad. Best to have a non-divisible ratio just like gears. It's safe to say
that putting the stators closer to the fan will be louder. How much? A
reasonable goal would be to place the stators at least one fan chord
behind. I would suggest that you make a stator on a stick and try it with
the current duct. Just stand behind and push the stator up into the duct
while running. Of course you'll take necessary safety precautions and be
sure to not hit the fan. If you can't hear the difference from one then
many probably will be the same. The effect should be exponential so as you
approach you'll hear nothing and suddenly as you get close the noise will
rapidly rise. Be careful.
Jeff Spitzer
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org