Subject: 20B - Intake manifold flange
From: Paul
Date: 4/29/2000, 11:13 PM


Paul,

The intake ports on a 20B enter the engine going down about 30 degrees below
horizontal (depends if you measure the top or bottom of the port).

If you can make the flange to match that or leave enough  material for the
customer to match this, I would also be interested in a flange (price
dependent).

The exhaust ports also come out at a similar angle.  My homemade exhaust
manifold continues this angle which results in the turbo being higher and,
hopefully, won't need a oil return scavenger pump.

Will it work?  I dono----.  2 more years!

Bob Darrah

The flange for the 13B is 3/8 thick. It is what ever you guys want it to be
as I am just getting quotes on the 20B flange for Vlad. 

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org