Take a look at http://www.bbk1.com. They make a Mustang in the tank
pump for less than $100 in the Summit catalog.

http://www.summitracing.com

The 155 liters per hour pump should be plenty as that is about
35 gallons per hour.

It has steel lines coming out no doubt so you could high temp silver
solder on threaded fittings.

I highly recommend putting the high pressure fuel pumps in the tanks 
to minimize vapor lock problems.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org