Subject: Injection water, alcohol & methenol
From: Paul
Date: 6/1/2000, 5:31 PM

Hans Conser wrote:



One of my greatest fears with my 13B with TO4 turbo is the chance of detonation.
I know it can happen in a split second.  I also know my response time to
correct the overboost will be to slow.  With this in mind,  would it be worth
the trouble to install an injection of water? or alcohol? or methanol? or what?
Since
I won't be using the oil injection ports, could they be used for methanol
injection? Would like to get any comments or suggestions in this regard.  BTW I
am
planning to use a small (3"x2.5"x8")intercooler.  BTW # 2 - Mazda Trix has been
working on a NOX system for the 13B --> Comments???
Regards,  Chris Gentry cgentry@ivic.net

Glasair (13B TO4 Turbo)

Key to preventing detonation is sufficient *fuel*.  That is, in reponse to
detonation you should inject more fuel (as opposed to water, methanol, etc)  If you
have a well mapped out fuel injection/ignition system, that responds to boost and
inlet air temp, you should not have any predetonation.  One of the things the
things sufficient fuel does is cool the intake charge and rotor face.  Preingnition
or detonation is when there is so much heat that the combustion chamber (or mainly
the rotor face on a rotary (poorly cooled)) ignites the charge before the engine is
ready, which can easily break stuff like pistons or apex seals.

You may want to have the computer use EGT as an FI computer input as well, but I
think that it is better used as a tuning tool for your fuel injection mapping.
Sufficient dynamic range is critical, and I have often thought that to allow for a
possible clogged injector, having a spare fuel injector for each rotor would be
great, you could have it kick in with a detonation detector.

I think you are making a big mistake by going with such a small intercooler, it
will increase your intake charge temperature, thereby decreasing the boost level
you will predetonate at, and it will also increase the backpressure on the engine
for a given amount of boost, putting more strain on the engine and the turbo.  You
will  see better BSFC with a larger intercooler.  They are expensive, but worth it
IMHO.

What I see in an aircraft application is that your greatest power needs occur when
your intake air is hot (low altitude) and your airflow (airspeed) is low, that is
in the beginning of a climb, this is an example of where a larger intercooler could
really pay off.

The good news is even if you did blow an apex seal, unlike a piston engine, your
13B would keep running at reduced power.  However, if your detonation was a fuel
starvation problem, you could blow the whole engine, this would be an argument for
having detonation detectors reduce boost and spark advance too.


BTW, I am not sure how well developed detonation detectors are for rotaries, can
anyone enlighten me?

Hans Conser

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org