Hans Conser wrote:
I think Mazda restricted the outlet to reduce cavitation at high RPM, it increases the
pressure on impeller preventing the pressure from getting below the vaporization point.
Okay, now all you engineer can shoot holes in my theory.
Hans Conser
PS I have followed the thermostat string with much interest, in the RX-7 world, those
in the know always use factory thermostats, aftermarket ones cause the temp to spike,
and sometimes overheat the engine.
I don't think so. I think the engineer charged with designing the pump
was handed some space limitations and he did the best he could given all
the restraints and bypass requirements. If I were designing a restrictor
I would make it easily variable, like a plate with a hole in it.
The pump works fine for the stock RX7 car where the average HP is 30.
Only the road racers are complaining and in theory it won't do so well
cooling a continuous 200 HP.
BTW I still don't know what climb rate Tracy climbed those mountains
with out in the west. If he comes to Copper State this year I am going
flying with him and take some factual data under real world conditions :-)
My airplane is going to need a lot more HP than Tracy is getting.
The gross weight on a four place Kis Cruiser is 2400 pounds.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org